Diva III
Pro Audio Tube Condenser Microphone¡¡¡¡

Jarrell Tube Condenser Microphone

 
   
   
 
 
   

Diva III

The new Jarrell Diva III Series signals the end of microphone envy. Based on classic vacuum tube designs and manufactured in state-of-the-art facilities to exacting standards, this multi-pattern, large diaphragm studio condenser delivers the lush, classic sounds and sonic range normally associated with rare and expensive vintage mics like the U47 and C12.
The Diva III Series was designed from scratch with input from top studio engineers and with a goal in mind to capture the soul of sound; reproducing music with an unprecedented warmth and transparency. To this end, we use hand-picked military grade 6072a vacuum tubes, Lundahl transformers, and with selectable cardioid, figure-8, and omni polar patterns (and 6 intermediate stages!) this microphone becomes your secret weapon in the studio, allowing you to put any instrument in the spotlight.
With the Diva III Series, voices will sound rich and detailed, piano, strings and wind instruments will have that special natural "character", while percussive instruments benefit from a fast attack and dynamic, powerful reproduction. Whether you want to capture throaty lows, rich mids, or open airy highs, the Diva III Series is ideal for faithfully capturing a wide variety of sources. The clarity and response of these microphones is world class and enables the music to shine through unhindered.
With the Jarrell Diva III Series you will not only get vintage world class performance at an affordable price point, but you¡¯ll be up and running as soon as you open the box. Each mic includes a professional shock mount, 7-pin mic cable, grounded IEC power supply, soft cloth bag and a custom flight case. All you need to do is plug it in and open up a channel.

   
 

SPECIFICATIONS

capsule: 3-micron thick Mylar with evaporated gold, double-sided
transconductance amplifier: 6072a pentode vacuum tube, wired as a triode, military grade selected
frequency response: 20Hz¨C20kHz ¡À1.5dB
sensitivity: 20mV/Pa (-20.5dBV)
max. SPL for 0.5% THD: 134dB (or 144dB with 10dB pad)
equivalent noise level: 16dB (A-weighted)
output impedance: 200¦¸, transformer isolated
recommended load impedance: > 1 k¦¸
connectors: 7-pin male XLR for mic output to power supply; 3-pin male XLR for power supply output
attenuation and rolloff: switchable 10dB pad; switchable 80Hz 2nd-order (12dB/octave) rolloff
polar patterns: cardioid, omni, figure-8, plus 6 intermediate stages (located on AC power supply)
size/weight: 8-1/4" (h) x 3" (w) x 2" (d); 1.6 lbs.

   
 
 
Copyright 2012: Jarrell Guitars Ltd. All Rights Reserved